Sending Functions6-38Text StampWhen sending, you can display a text stamp on the originals.NOTE: The optional Expansion Memory is required.This cannot be set when Text Stamp is set in the system settings. For details, see Sending Jobs on page 9-32.The items that may be configured are as follows.Use the procedure below to specify the Text Stamp settings.1 Press the Send key.2 Place the originals on the platen.3 Press [Advanced Setup] and then press [TextStamp].4 Press [On].5 Press [Keyboard] and enter the text string to bedisplayed, or select a text stamp from the displayedtemplates.NOTE: Templates that have been set will appear. Fordetails on registering templates, refer to SystemStamp on page 9-29.6 Press [Position] and select the position of the textstamp.Item DetailPosition Selectable positions are [Top Left], [Top Middle], [Top Right],[Middle Left], [Center], [Middle Right], [Bottom Left], [BottomMiddle], and [Bottom Right].Font Size Set the font size of the printed text stamp.** Registered font sizes are displayed. For details on registering font sizes, refer to System Stamp onpage 9-29.Style Set the font style of the printed text stamp. [Bold] or [Italic] canbe set.Font Set the font of the printed text stamp. [Courier] or [Letter Gothic]can be set.Color Set the color of the printed text stamp. [Black], [Cyan],[Magenta], [Yellow], [Red], [Green], or [Blue] can be set.Density Set the density of the color of the printed text stamp.DisplayPatternSet the display method of the printed text stamp. [Transparent],[Clipping], or [Overwrite] can be selected.StatusCopiesCancel OKText StampAdd ShortcutKeyboardOnOff StampURGENT COPYPosition Font OriginalOrientationTopLeftptBlack9 Top Edgeon Top10/10/2010 10:10
