Default Setting (System Menu)9-74Panel Reset TimerIf you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset. Options arebetween 5 and 495 seconds (every five seconds).NOTE: If you select [Off] for Auto Panel Reset, the time display does not appear.Use the procedure below to set the reset time.1 Press the System Menu key.2 Press [ ], [Date/Timer] and then [Change] of Panel Reset Timer.3 Press [+] or [–] to enter the time until Auto Panel Reset is turned on.You cannot use the numeric keys to enter this value.4 Press [OK].Low Power TimerYou can specify the amount of time to wait before Auto Low Power Mode.Specify a value from 1 - 240 minutes (1 minute increments).For more information on Low Power Mode, refer to the Low Power Mode and Auto Low Power Mode on page 2-9.Use the procedure below to set the Low Power Mode.1 Press the System Menu key.2 Press [ ], [Date/Timer] and then [Low Power Timer].3 Press [+],[–] or the numeric keys to enter the time until Low Power Mode is turned on.4 Press [OK].Auto SleepIf no job runs for a certain period of time, automatically enter Sleep Mode. Refer to Sleep and Auto Sleep onpage 2-10 for Sleep.Auto SleepSelect whether to use Auto Sleep or not.NOTE: Time remaining before Auto Sleep can be modified as necessary.Use the procedure below to specify the auto sleep setting.1 Press the System Menu key.2 Press [ ], [Date/Timer] and then [Change] of Auto Sleep.3 Press [Off] or [On].4 Press [OK].
