Copying Functions4-34If [Size Entry] is selected, press [+] or [-] to specifythe horizontal size (X) and the vertical size (Y).Press [# Keys] to enter the size directly using thenumeric keys.5 Press [OK].6 Press the Start key to start copying.Paper SelectionSelect the paper source that contains the required paper size.NOTE: Specify in advance the size and type of the paper loaded in the cassette (refer to Original/PaperSettings on page 9-4).When printing on paper that is wider than the paper previously used, dirt on the conveying guide may soil theedges of the paper infrequently. If you find that the paper is soiled, use the provided cleaning cloth to clean theconveying guide. (refer to Conveying Guide on page 11-18)Selecting the CassetteUse the procedure below to select the paper supply cassette.1 Press the Copy key.2 Place the originals on the platen.3 Press [Org./Paper/Finishing] and then [PaperSelection].4 Press the key of the paper source corresponding tothe required paper size. The cassette in which thepaper is loaded is selected.If [Auto] is selected, the paper matching the size ofthe original is selected automatically.5 Press [OK].6 Press the Start key to start copying.Original SizeXY(50 - 432)# Keys# Keysmmmm297210(50 - 297)CopiesStatusCancel OKAdd ShortcutStandardSizes 1StandardSizes 2OthersSize Entry10/10/2010 10:10100%A4210x297mmPreviewOriginalZoomPaper:::StatusCancel OKPaper SelectionAutoA4PlainA4PlainA3PlainA4PlainPlainA4Add ShortcutCopiesCassettePaper Set.MP TrayMP Tray10/10/2010 10:10100%A4A4PreviewOriginalZoomPaper:::
