Copying Functions4-3147 Press [Position] and select the position of the textstamp.8 Press [Font] and select font and display settings forthe text stamp.9 Press [Original Orientation] to choose theorientation of the originals, either [Top Edge on Top]or [Top Edge on Left]. Then press [OK].10 Press [OK].11 Press the Start key. Copying begins.Bates StampWhen making copies, you can print a bates stamp on the originals.NOTE: The optional Expansion Memory is required.This cannot be set when Bates Stamp is set in the system settings. For details, see Printing Jobs on page 9-30.The items that may be configured are as follows.Use the procedure below to specify the Bates Stamp settings.1 Press the Copy key.2 Place the originals on the platen.3 Press [Layout/Edit] and then press [Bates Stamp].Item DetailPosition Selectable positions are [Top Left], [Top Middle], [Top Right],[Middle Left], [Center], [Middle Right], [Bottom Left], [BottomMiddle], and [Bottom Right].Font Size Set the font size of the printed bates stamp.** Registered font sizes are displayed. For details on registering font sizes, refer to System Stamp onpage 9-29.Style Set the font style of the printed bates stamp. [Bold] or [Italic] canbe set.Font Set the font of the printed bates stamp. [Courier] or [LetterGothic] can be set.Density Set the density of the color of the printed bates stamp.DisplayPatternSet the display method of the printed bates stamp.[Transparent], [Clipping], or [Overwrite] can be selected.
