Default Setting (System Menu)9-639Report for Job Canceled before SendingPrint a send result report when the job is canceled before being sent.1 Press the System Menu key.2 Press [Report], [Next] of Result Report Setting, [Next] of Send Result Report and then [Change] ofCanceled before Sending.3 Press [Off], [On].4 Press [OK].Sending Log HistoryYou can send the log history by e-mail. You can either send it manually as needed or have it sent automaticallywhenever a set number of jobs is reached.DestinationSet the destination to which log histories are sent.Use the procedure below to set the destination.1 Press the System Menu key.2 Press [Report], [Next] of Sending Log History and then [Change] of Destination.3 To enter a new e-mail address, press [E-mail Address Entry].Press [E-mail Address], enter the destination e-mail address and then press [OK].4 To set an address from the address book, press [E-mail Address Book].5 Press [Address Book]. Select the destination from the address book and press [OK].The selected e-mail addresses is displayed.NOTE: For information on specifying destinations, refer to Specifying Destination on page 3-39.You can view information on the selected destinations by pressing [Detail].6 Press [OK].Auto SendingThis function automatically sends the log history to the specified destinations whenever a set number of jobshas been logged.Use the procedure below to set automatic log history transmission.1 Press the System Menu key.2 Press [Report], [Next] of Sending Log History and then [Change] of Auto Sending.3 Press [On] and enter the number of jobs in the log history print by using [+]/[-] or the numeric keys. You canenter any number between 1 and 1500.4 Press [OK].
