Basic Operation3-56Recalling ProgramsUse the procedure below to recall a registered program.If the Program key is pressed 1 Press the Program key.2 Press [Recall] and press the key corresponding tothe program number (01 to 50) to recall. Press theQuick No. Search key or [No.] to enter theprogram number directly for recalling.If [Program] is pressed in the copy function screenNOTE: If the program cannot be recalled, theDocument Box or the form overlay specified in theprogram might have been deleted. Check theDocument Box.[Program] can be pressed in each function to call upthe program registered for the function.3 Place the originals and press the Start key.Copying is performed according to the registeredprogram.Editing and Deleting ProgramsYou can change program number and program name, or delete program.Use the procedure below to edit or delete a program.1 Press the Program key.2 Press [Edit] and press the key(s) corresponding tothe program number (01 to 50) to change or delete.3 To edit a program, use the procedure for registeringa program and press [Change]. Then change theprogram number and program name and press[Save]. Choose [Yes] in the confirmation screen tochange the program.To delete the program, press [Delete this Program].Choose [Yes] in the confirmation screen to finallydelete the program.No.Recall Add Edit10/10/2010 10:10StatusEco Copy Copy 1Send 2 FAX 1ID Card CopyFAX 2Send 1Box 101 02 03 0405 07 080609 10 11 1213 15 161417 19 2018No.StatusSend 2 FAX 1 FAX 2Send 1Box 101 02 03 0405 07 080609 10 11 1213 15 161417 19 2018Image QualityOrg./Paper/FinishingQuick Setup Layout/Edit AdvancedSetupProgram10/10/2010 10:10Eco Copy Copy 1ID Card Copy
