Preparation before Use2-12Setting Date and TimeFollow the steps below to set the local date and time at the place of installation.When you send an E-mail using the transmission function, the date and time as set here will be printed in theheader of the E-mail message. Set the date, time and time difference from GMT of the region where the machineis used.NOTE: If user login administration is enabled, you can only change the settings by logging in withadministrator privileges. If user login administration is disabled, the user authentication screen appears. Entera login user name and password, and press [Login]. Refer to Adding a User (Local User List) on page 10-5 forthe default login user name and password.Be sure to set the time difference before setting the date and time.If you change Date/Time setting, trial functions will be unavailable. For details, refer to Optional Function onpage 9-107.1 Press the System Menu key.2 Press [ ], [Date/Timer] and then [Change] ofTime Zone.3 Select the region.NOTE: Press [ ] or [ ] to view the next region.4 Press [Off] or [On] of Summer Time and press [OK].NOTE: If you select a region that does not utilizesummer time, the summer time setting screen will notappear.5 Press [Change] of Date/Time.6 Set the date and time. Press [+] or [–] in eachsetting.7 Press [OK].Date/Timer - Time ZoneSet time zone.Select the location nearest you.Time Zone-12:00 International Date Line West1/13-11:00 Samoa-10:00 Hawaii-09:00 Alaska-11:00 Universal Coordinated Time-11-08:00 Baja CaliforniaStatusCancel OK10/10/2010 10:10Date/Timer - Date/TimeSet the date and time.OffDayMonthYearSecondMinuteHour201010 10 3110 10StatusCancel OK10/10/2010 10:10
