Sending Functions6-24Continuous ScanWhen the multi-page originals cannot be placed in the document processor at one time, the originals can bescanned in separate batches and then sent as one job. With this function, originals can be scanned one afteranother until you press [Finish Scan].Any of the following settings can be changed during scanning.• Original Size• Original Orientation• 2-sided/Book Original• Density• Original Image• Scan Resolution• Color Selection• Sending Size• Zoom• Border Erase• Prevent Bleed-thru• FAX TX Resolution (For details, refer to Fax System (V) Operation Guide.)The procedure for using continuous scanning when sending scanned images is explained below.1 Press the Send key.2 Press [Advanced Setup] and then [ContinuousScan].3 Press [On]. Continuous Scan is selected.4 Press [OK].5 Specify the destination.6 Place the original, and press the Start key.When the scanning is completed, change thesettings as necessary.7 Place the next original, and press the Start key. Scanthe remaining originals by the same procedure.When you have scanned all the originals, press[Finish Scan] to start sending.Continuous ScanScan a large number of originalsin separate batches and then produceas one job.*Settings can be changed during scanning.Off OnCancel OKAdd ShortcutStatusDestination10/10/2010 10:10100%A4A4PreviewOriginalZoomSend:::
