Default Setting (System Menu)9-72Date/TimerDate/Timer settings include:• Date/Time …9-72• Date Format …9-72• Time Zone …9-73• Auto Panel Reset …9-73• Low Power Timer …9-74• Auto Sleep …9-74• Error Clear Timer …9-75• Interrupt Clear Timer …9-76• Error Job Skip …9-76NOTE: If user login administration is enabled, you can only change the settings by logging in withadministrator privileges. If user login administration is disabled, the user authentication screen appears. Entera login user name and password, and press [Login]. Refer to Adding a User (Local User List) on page 10-5 forthe default login user name and password.Date/TimeSet the date and time for the location where you use the machine. If you perform Send as E-mail, the date andtime set here will be displayed on the header.NOTE: Be sure to set Time Zone before the Date/Time setup.Use the procedure below to set the date and time.1 Press the System Menu key.2 Press [ ], [Date/Timer] and then [Change] of Date/Time.3 Press [+] or [–] to enter the date and time respectively.4 Press [OK].NOTE: If you try to change the date/time when a trial application (page 9-107) is running, the If you changeDate/Time setting, trial functions will be unavailable. Are you sure? message is displayed. To change the date/time, press [Yes].Date FormatSelect the display format of year, month, and date. The year is displayed in Western notation.Use the procedure below to select the date format.1 Press the System Menu key.2 Press [ ], [Date/Timer] and then [Change] of Date Format.3 Select [MM/DD/YYYY], [DD/MM/YYYY], or [YYYY/MM/DD] and press [OK].
