Copying Functions4-134Paper OutputYou can use the procedure below to select an output destination such as the optional document finisher for yourcopies.NOTE: Optional output destinations include the job separator, 1,000 sheet document finisher, 4,000 sheetdocument finisher, and mailbox.The table below shows the available output destinations.NOTE: To change the default destination for copies, refer to Paper Output on page 9-15 for details.When [Heavy 3] (164 g/m 2 - ) or higher is set in Paper Weight and Mailbox (Option) is set for the outputdestination, the output destination is automatically changed to a tray that can be used.Use the procedure below to select the output destination.1 Press the Copy key.2 Place the originals on the platen.3 Press [Org./Paper/Finishing] and then [PaperOutput].4 Select the output destination for finished copies.5 Press [OK].6 Press the Start key to start copying.Destination DescriptionInner tray** This cannot be selected when the optional document finisher is installed.Inner tray of the machine (where copies are stored)Finisher Left TrayFinisher Top TrayTray of the optional 1,000 sheet document finisherTray A, Tray B, Tray C Trays A to C in the optional 4,000 sheet document finisherRight Tray Optional right job separatorJob Separator Tray* Optional job separatorTray 1 to 7 Trays 1 to 7 in the optional mailbox (tray 1 is the top tray)Paper OutputFace UpStatusCopiesCancel OKAdd ShortcutTray A Right TrayTray CTray BTray 1 Tray 3Tray 2Tray 5Tray 4Tray 6 Tray 710/10/2010 10:10100%A4A4PreviewOriginalZoomPaper:::
