Status / Job Cancel8-138Checking the Remaining Amount of Toner and Paper (Paper/Supplies)Check the remaining amount of toner, paper, and staples on the touch panel.Use the procedure below to check the remaining amounts.1 Press the Status/Job Cancel key.2 Press [Paper/Supplies].Check the remainingamount of toner and the status of the waste tonerbox in Toner Information, and the remainingamount of paper in each paper source in Paper.The items you can check are described below.Remaining amount of tonerYou can check the remaining amount of toner level from 100 to 0% (1% increments).Status of the waste toner boxYou can check the status of waste toner box.PaperYou can check the size, orientation, type, and remaining amount of paper in each paper source.The remainingamount of paper is shown by 5 levels as 100, 75, 50, 25, and 0%, however, the paper in the multi purpose trayis shown by 2 levels as 100% and 0%.OthersYou can check the status of staples and punch waste box.NOTE: If the optional document finisher and punch unit are installed, the Others section provides the status ofthe punch waste box and whether or not staples are available.Toner Information Paper OthersToner Status Size Type Status Type StatusBlack (K) A3A3A4A4A4PlainPlainPlainPlainPlain100%100%100%100%100%Staple A OKWaste Toner OKStatusStatusPrinting Jobs Sending Jobs Storing Jobs Device/Communication Paper/Supplies100%A4 Plain 100%10/10/2010 10:10
