Copying Functions4-42File Name EntryNames a copy job. Add other information such as date and time or job number as necessary. You can check ajob history or job status using the job name, date and time, or job number specified here.Use the procedure below to assign a name to your copy job.1 Press the Copy key.2 Place the originals on the platen.3 Press [Advanced Setup] and then [File Name Entry].4 Press [File Name], enter the name for a copy job,and press [OK].To add date and time, press [Date and Time]. Toadd job number, [Job No.]. Added information isdisplayed in Additional Info.5 Press [OK].6 Press the Start key to start copying.Priority OverrideSuspends a current job and gives the selected job priority for copying. The suspended job resumes after PriorityOverride copying is finished.NOTE: The current job that is selected as Priority Override cannot be suspended.The procedure for using Priority Override is explained below.1 Press the Copy key.2 Place the originals on the platen.3 Press [Advanced Setup] and then [PriorityOverride].4 Press [On] to select Priority Override.5 Press [OK].6 Press the Start key. The current copy job issuspended and the copy job selected in PriorityOverride starts. The suspended job resumes afterPriority Override copying is finished.StatusCopiesCancel OKFile Name EntryAdd ShortcutAdd a file name.Additional information such as Job No.and Date and Time can also be set.File NameAdditional InfoDate and TimeJob No.Job No.doc10/10/2010 10:10
