Copying Functions4-2Original SizeSpecify the size of originals being scanned. Be sure to specify the original size when copying non-standardsizes.The following options are available.1 Press the Copy key.2 Place the originals on the platen.3 Press [Org./Paper/Finishing] and then [OriginalSize].4 Press [Standard Sizes 1 ], [Standard Sizes 2 ],[Others] or [Size Entry] to select the original size.Item How to Select SizesStandardSizes 1Have the size of originaldetected automatically, orselect from the standardsizes.Inch models: Auto, Ledger, Legal, Letter, Letter-R,Statement, Statement-R, Oficio II and 11×15"Metric models: Auto, A3, B4, A4, A4-R, B5, B5-R, A5,A5-R, B6, B6-R, A6-R, Folio and 216×340mmStandardSizes 2Select from the standardsizes not included in theStandard Sizes 1.Inch models: A3, B4, A4, A4-R, B5, B5-R, A5, A5-R,B6, B6-R, A6-R, Folio, 8K, 16K, 16K-R and216×340mmMetric models: Ledger, Legal, Letter, Letter-R,Statement, Statement-R, Oficio II, 11×15", 8K, 16K and16K-ROthers Select from envelope,postcard or the custom sizedoriginals*.* For instructions on how to specify the custom original sizes (Custom 1 to 4), refer toCustom Original Size on page 9-4.** The input units can be changed in the System menu.Refer to Measurement on page 9-12.Use the procedure below to select the original size.Hagaki, Oufuku hagaki, Custom 1 to 4Size Entry Enter the size not included inthe standard sizes 1 and 2**.Inch modelsHorizontal: 2.00 to 17.00" (in 0.01" increments),Vertical: 2.00 to 11.69" (in 0.01" increments)Metric modelsHorizontal: 50 to 432 mm (in 1 mm increments),Vertical: 50 to 297 mm (in 1 mm increments)A3A4 A5A4A5A6 B4 B5B5AutoStandardSizes 1StandardSizes 2OthersSize EntryOriginal SizeCopiesStatusCancel OKAdd ShortcutB6 B6216x340mm10/10/2010 10:10100%A4A4:::PreviewOriginalZoomPaper
