Default Setting (System Menu)9-4SoundSet options for buzzer sound during the machine operations.The table below lists the buzzer types and their settings and details.Use the procedure below to set the sound options.1 Press the System Menu key.2 Press [Common Settings], [Next] of Sound and then [Next] of Buzzer.3 Press [Change] of Volume, Key Confirmation, Job Finish, Ready, Warning, or USB Keyboard.4 Select the buzzer volume level, or other sound options.Original/Paper SettingsRegister additional types and sizes of originals and paper.Custom Original SizeSet up frequently-used custom original sizes. The custom size options are displayed on the screen to selectoriginal size. The dimensions available are as follows.The table below lists the sizes that can be registered.Item Value DescriptionVolume 0 (Mute), 1 (Minimum) to5 (Maximum)Set the buzzer volume level.Key Confirmation Off, On Emit a sound when the control paneland touch panel keys are pressed.Job Finish Off, On,FAX Reception Only** This is displayed when the optional fax kit is installed.Emit a sound when a print job isnormally completed.Ready Off, On Emit a sound when the warm-up iscompleted.Warning Off, On Emit a sound when errors occur.USB Keyboard Off, On Emit a sound when a USB keyboard isoperated.Input units DimensionsInch models X: 2.00 to 17.00" (in 0.01" increments)Y: 2.00 to 11.69" (in 0.01" increments)Metric models X: 50 to 432 mm (in 1 mm increments)Y: 50 to 297 mm (in 1 mm increments)
