Copying Functions4-22CoverAdd a cover to the finished copies. You can copy the first page and/or the last page onto colored paper or thickpaper fed from the different paper source than the regular one. The following two options are available. Paperfor the cover is supplied from the multi purpose tray.To feed the cover paper from the cassette, refer to Paper Source for Cover on page 9-11.The procedure for using Cover mode copying is explained below.1 Press the Copy key.2 Place the originals on the platen.3 Press [Layout/Edit] and then [Cover].4 Press [Front Cover] or [Front and Back Covers].5 Press [OK].6 Press the Start key. Copying begins.If the originals are placed on the platen,consecutively replace each original after pressingthe Start key.After scanning all originals, press [Finish Scan] tostart copying.Type of Cover DescriptionFront Cover First page of the originals is copied on a differentpaper.Front and BackCoversFirst page and last page of the originals arecopied on different paper.StatusCopiesCancel OKCoverAdd ShortcutPrint the cover pages using an other paper source.Select either [Front Cover] or [Front and Back Covers].* Set paper source for cover in System Menu.Front and BackCoversOff Front Cover10/10/2010 10:10100%A4A4PreviewOriginalZoomPaper:::
