Panasonic HomeHawk KX-HNC500 User Manual

Window camera mode settingsWindow camera mode settings (overview)Modes allow the cameras to operate according to pre-determined settings. You can use modes to matchwhat actions you want cameras to make (record images when motion is detected, etc.). You can usepreset modes or create your own modes.ExamplesThe following are some examples of how you can use modes.– I want the camera to continually record images 24/7– I want the camera to record images when motion is detected by the camera– I want to receive notifications when motion is detected by the cameraPreset modesThere are 3 preset modes that can be used for cameras: [Basic], [Protection], and [24/7 Recording].– [Basic]:Use this if you don't want to use a mode and don't want the camera to operate according topre-determined settings.– [Protection]:Use this in the following situations.R You want the camera to:→Turn record images when motion is detected→Send notifications to you when motion is detectedR You don’t want the camera to:→Record images 24/7– [24/7 Recording]:Use this in the following situations.R You want the camera to:→Record images 24/7→Send notifications to you when motion is detectedNote:R When using [24/7 Recording], because images are continuously recorded, separate recordings arenot made when motion is detected.R The firmware cannot be updated while [24/7 Recording] is in use. Change the mode to [Basic] toenable updating.The following describes the settings for the [Protection] and [24/7 Recording] modes.Settings for when motion is detectedYou can specify the settings for when motion is detected.Setting [Protection] [24/7 Recording]Start Recording On –Duration [10 sec] –Send Notifications [All Motion] [All Motion]106Using a shelf, floor, and window camera