Panasonic HomeHawk KX-HNC500 User Manual

Temperature sensorYou can configure the camera to send notifications if the camera’s ambient temperature is too cold or toohot.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Camera Settings] and select the desired camera.3 Tap [Detection] ® [Temperature Alert Range].4 Select the desired temperature for the lower threshold of the acceptable temperature range.5 Select the desired temperature for the upper threshold of the acceptable temperature range, andthen tap [OK].Temperature unitsYou can change the units displayed for the temperature.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Camera Settings] and select the desired camera.3 Tap [System] ® [Temperature Units].4 Select whether the temperature is displayed and specified in Fahrenheit or Celsius, and then tap[OK].Sound sensitivityYou can configure the sound sensitivity used for sound detection.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Camera Settings] and select the desired camera.3 Tap [Detection] ® [Sound Sensitivity].4 Select the desired setting, and then tap [OK].– [High]: The microphone is very sensitive to sound, i.e., even a small sound will trigger thenotification.– [Normal]: The microphone is moderately sensitive to sound.– [Low]: The microphone is only slightly sensitive to sound, i.e., a large sound is required to triggerthe notification.Camera SD cardsSD card capacity and total recording timeThe following recording times apply when images from one camera are recorded. All times areapproximate.– 4 GB card: 4 hours– 8 GB card: 9 hours– 16 GB card: 18 hours83Using a shelf, floor, and window camera