Panasonic HomeHawk KX-HNC500 User Manual

Displaying device informationYou can display device information, such as firmware versions and MAC addresses, and select whetheror not to upload logs.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Access Point Settings] and select the desired access point.3 Tap [System] ® [System Info].– [Access Point Log Upload]: Determines whether or not logs are uploaded.Updating the firmwareYou can use this feature to check for a newer version of your device’s firmware (i.e., system software). Ifa newer version is found, you can update the firmware.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Access Point Settings] and select the desired access point.3 Tap [System] ® [Firmware Update].R Your device will connect to the Internet and check for a newer version of its firmware.4 Follow the on-screen instructions.Notification settingsYou can select which types of status notifications are displayed, and which are not.Important:R In order to receive notifications, your mobile device must be connected to the Internet. If your mobiledevice is not connected to a wireless network, a mobile network connection is required.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Access Point Settings] and select the desired access point.3 Tap [Notification Settings].4 Select the desired settings.– [Recording Error]: Determines whether a notification is displayed when a recording error occurs.– [Mode Change]: Determines whether a notification is displayed when a mode is changed.Login settingsConfiguring automatic loginYou can specify whether or not you must enter a login password in order to connect to your devices whileaway from home.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Access Point Settings] and select the desired access point.144Using a front door camera and outdoor camera