Panasonic HomeHawk KX-HNC500 User Manual

Recording to SD cardsYou can specify whether to allow recorded camera images to be erased automatically by new imageswhen the SD card is full, and check the remaining capacity of the SD card.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Camera Settings] and select the desired camera.3 Tap [Recording Settings].4 Select the desired setting.– [Overwrite Recording]: Determines whether recorded camera images are erased automaticallyby new images when the SD card is full.– [microSD Card]: Displays the currently used capacity and the maximum capacity of the SD card,the current number of recorded files, and the maximum number of files that can be recorded.R A maximum of 65,535 files can be recorded. If 65,535 files are recorded, additional files cannotbe recorded even if there is free capacity in the SD card.Formatting SD cards (window cameras only)You can format SD cards inserted into the window camera.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Camera Settings] and select the desired camera.3 Tap [Recording Settings].4 Tap [Format microSD Card] ® [OK].Using night vision (shelf cameras and floor cameras only)If there is not adequate light to illuminate the subject, such as at night, the camera switches to nightvision mode depending on the settings.The following settings can be selected for the night vision.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Camera Settings] and select the desired camera.3 Tap [Night Vision].4 Select the desired setting and then tap [OK].Shelf camera:– [ON]: Lights infrared LEDs so that images can be seen in the dark.– [OFF]: Turns off night vision mode.Floor camera:– [Color]: Turns on the light so that images can be displayed in color. Has shorter visibility rangethan [Monochrome].R When recording is started after a detection is made or if viewing live images from a mobiledevice, the light will turn on if it is dark so that the images can be viewed or recorded in color.– [Monochrome]: Lights infrared LEDs so that images can be seen in the dark. Has longer visibilityrange than [Color].– [OFF]: Turns off night vision mode.111Using a shelf, floor, and window camera