Panasonic HomeHawk KX-HNC500 User Manual

Meaning of symbols used in this sectionIndicator offIndicator litIndicator blinking slowlyIndicator blinkingIndicator blinking quicklyIndicator blinking very quicklyIndicator blinking slowly in two colorsIndicator blinking in two colorsAccess point LED indicatorOff No power, or LED indicator is turned off *1Green Power is on (normal operations)*1, or registration completed for thecamera or mobile deviceRegistration mode, updatingObtaining an IP address, or accessing a microSD card*1Green or yellow(amber)(alternating) orStarting up*2Red Registration failedYellow (amber) Power on until start up completedIP address is not obtained, or Ethernet cable is not connected to therouter*1 You can configure the access point so that its LED indicator does not light in most states. See“Status LED”, Page 140.*2 It may take some time for the access point to finish starting up.Front door camera and outdoor camera LED indicatorOff R No powerR More than 5 seconds have passed since turning on the power whenthe camera is not registered to the access pointR LED indicator is turned off*1Green Registration successfully completed or signal level is strong*3Registration mode, updating29Getting started with the HomeHawk!