Panasonic HomeHawk KX-HNC500 User Manual

2 Tap [SHELF Camera].3 Tap [Add New Camera].4 Follow the on-screen instructions, remove the rear cover from the camera, and then tap [Next].5 Follow the on-screen instructions, plug in the camera, and then tap [Next].R Wait about 1 minute for the camera to start up.6 Follow the on-screen instructions and confirm the LED color on your camera.– If the camera’s LED indicator lights in yellow, tap the yellow icon and proceed to step 7.– If the camera’s LED indicator lights in a color other than yellow, tap the icon for that color andfollow the on-screen instructions.7 Confirm that the wireless network name (SSID) of the wireless router that the camera will connect tois displayed, and then tap [Done].R If a different wireless network name is displayed, tap [Change Wi-Fi] and follow the on-screeninstructions.8 Determine if you will complete the initial setup using WPS or without using WPS (Basic Setup).– Set up using WPS:Select [WPS] and proceed from WPS.– Set up without using WPS:Select [Basic Setup] and proceed from Basic Setup.WPSWPS is a function of wireless routers that is used to easily connect wireless devices to wirelessrouters. A WPS button on a wireless router indicates that it has the WPS function.WPS1 Press and hold the WPS button on the wireless router until the router’s WPS LED indicator startsblinking.2 Tap [Next].3 Press the SETUP button on the camera for about 5 seconds until the camera beeps.R The camera’s LED indicator starts blinking in yellow.4 Tap [Next].R When [Linking] is displayed, wait for up to about 2 minutes until the camera is connected to yourwireless network and mobile device.5 Press the SETUP button on the camera for about 2 seconds until the camera beeps.R The camera’s LED indicator starts blinking in green.46Using a shelf, floor, and window camera