Panasonic HomeHawk KX-HNC500 User Manual

6 When prompted, create a login password for the camera, and then tap [Next].7 When prompted, enter a name for the camera and mobile device, and then tap [OK].R The camera name setting is used by your mobile device to identify the camera. This is useful whenyou have multiple cameras.R The mobile device name setting is used to identify your mobile device. This is useful whenperforming certain operations, such as deregistering.8 When [Congrats!] is displayed, tap [Explore HomeHawk].R A screen asking you to set the home position of geo-fencing ( “Automatic Mode Switching”,Page 64) is displayed, tap [Set Current pos as Home] ® [OK].R The app’s home screen is displayed when initial setup is completed.9 Reattach the rear cover.Basic Setup1 Enter the password for the wireless network and then tap [Next].2 Depending on the type of mobile device that you use, proceed as follows.Android users:Go to step 3.iOS 11.0 and later users:Tap [Join].iOS 10.x users:Change your mobile device’s wireless network setting temporarily so that it connects to the cameradirectly.R Open your mobile device’s [Settings] app, tap [Wi-Fi], select “Pansonic_Camera”, enter“12345678” as the password, and then tap [Join].Note:R Your mobile device starts searching for the camera.R When [Linking] is displayed, wait for up to about 3 minutes until the camera is connected to yourwireless network and mobile device.3 Press the SETUP button on the camera for about 2 seconds until the camera beeps.R The camera’s LED indicator starts blinking in green.4 When prompted, create a login password for the camera, and then tap [Next].5 When prompted, enter a name for the camera and mobile device, and then tap [OK].R The camera name setting is used by your mobile device to identify the camera. This is useful whenyou have multiple cameras.R The mobile device name setting is used to identify your mobile device. This is useful whenperforming certain operations, such as deregistering.6 When [Congrats!] is displayed, tap [Explore HomeHawk].R A screen asking you to set the home position of geo-fencing ( “Automatic Mode Switching”,Page 64) is displayed, tap [Set Current pos as Home] ® [OK].R The app’s home screen is displayed when initial setup is completed.7 Reattach the rear cover.Registering other mobile devices to the shelf cameraConfirm the following before you begin.– Make sure you have installed the [HomeHawk] app on your mobile device– Make sure your wireless router and the camera are turned on– Make sure your mobile device is connected to your wireless router– Make sure your mobile device can connect to the Internet47Using a shelf, floor, and window camera