Panasonic HomeHawk KX-HNC500 User Manual

Recording settingsYou can specify whether to allow recorded camera images to be erased automatically by new imageswhen the SD card is full, and check the remaining capacity of the SD card.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Access Point Settings] and select the desired access point.3 Tap [Recording Settings].4 Select the desired setting.– [Overwrite Recording]: Determines whether recorded camera images are erased automaticallyby new images when the SD card is full.– [microSD Card]: Displays the currently used capacity and the maximum capacity of the SD card.Bit rate settings for Amazon Echo Show and Google HomeYou can select the bit rate to be used when transmitting data for Amazon Echo Show or Google HomeChromecast.If you cannot display camera images on Amazon Echo Show or via Google Home Chromecast, or ifimages are not displayed smoothly, try using a lower bit rate setting.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Access Point Settings] and select the desired access point.3 Tap [System] ® [Bit Rate].4 Select the desired setting and then tap [OK].Note:R This setting is only available when Amazon Echo Show ( “Amazon Alexa features (overview)”,Page 35) or Google Home ( “Google Home features (overview)”, Page 38) settings are enabled.Time adjustmentYou can manually or automatically adjust the time of your devices to match the mobile device.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Access Point Settings] and select the desired access point.3 Tap [System] ® [Time Adjustment].4 To manually adjust the time:Tap [Update Time].To automatically adjust the time:Tap the name of the displayed mobile device, select the mobile device to match the time with, andthen tap [OK].143Using a front door camera and outdoor camera