Panasonic HomeHawk KX-HNC500 User Manual

2 Press the SETUP button on the camera for about 2 seconds.R The camera’s LED indicator starts blinking in green.3 When prompted, create a login password for the camera, and then tap [Next].4 When prompted, enter a name for the camera and mobile device, and then tap [OK].R The camera name setting is used by your mobile device to identify the camera. This is useful whenyou have multiple cameras.R The mobile device name setting is used to identify your mobile device. This is useful whenperforming certain operations, such as deregistering.5 When [Congrats!] is displayed, tap [Explore HomeHawk].R The app’s home screen is displayed when initial setup is completed.6 Reattach the cover.WPS1 Press and hold the WPS button on the wireless router until the router’s WPS LED indicator startsblinking.2 Tap [Next].3 Press the SETUP button on the camera for about 5 seconds.R The camera’s LED indicator starts blinking in yellow.4 Tap [Next].R When [Linking] is displayed, wait for up to about 2 minutes until the camera is connected to yourwireless network and mobile device.5 Press the SETUP button on the camera for about 2 seconds.R The camera’s LED indicator starts blinking in green.6 When prompted, create a login password for the camera, and then tap [Next].7 When prompted, enter a name for the camera and mobile device, and then tap [OK].R The camera name setting is used by your mobile device to identify the camera. This is useful whenyou have multiple cameras.R The mobile device name setting is used to identify your mobile device. This is useful whenperforming certain operations, such as deregistering.8 When [Congrats!] is displayed, tap [Explore HomeHawk].R The app’s home screen is displayed when initial setup is completed.9 Reattach the cover.Registering other mobile devices to the window cameraConfirm the following before you begin.– Make sure you have installed the [HomeHawk] app on your mobile device– Make sure your wireless router and the camera are turned on– Make sure your mobile device is connected to your wireless router– Make sure your mobile device can connect to the Internet1 Start the [HomeHawk] app by tapping its icon (shown below).R The end-user license agreement is displayed the first time you start the app.R Confirm all of the displayed permission screens and agree as necessary.R Select your country or region if displayed, and then tap [Next].92Using a shelf, floor, and window camera