Panasonic HomeHawk KX-HNC500 User Manual

5 Using your Google Home app, search for the “Panasonic HomeHawk” service. Enter your PanasonicID in the displayed screen and enable your devices.R For details about these settings, refer to the operating instructions and support informationprovided for your Google Home.Changing your Panasonic ID1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Google Home].3 Select the desired device.4 Tap [Unlink from Google Home] ® [OK], and follow the steps in “Logging in to the Panasonicserver and linking with your Google Home”, Page 38 to log in using the new Panasonic ID.Using Google Home to control devicesOnce you have enabled your devices for use with your Google Home, you can use your Google Home tocontrol your devices. Devices are controlled by talking to your Google Home and using the voicecommands specified in the “Panasonic HomeHawk” service.Note:R Available features and voice commands are subject to change without notice. Refer to the informationprovided with the “Panasonic HomeHawk” skill for available features and voice commands.R If Google Home does not recognize the camera names or mode names assigned to your devices, trychanging the camera names*1 or mode names*1.*1 Front door cameras/outdoor cameras: “Changing the name of cameras”, Page 140Floor cameras/shelf cameras/window cameras: “Changing the name of cameras”, Page 113*2 Front door cameras/outdoor cameras: “Mode name”, Page 134Shelf cameras: “Mode name”, Page 63Floor cameras: “Mode name”, Page 86Window cameras: “Mode name”, Page 107Displaying live images from a camera (all cameras except HD cameras)Live images from cameras can be displayed and turned off (hidden) on a TV connected to Chromecastusing Google Home.Note:R Chromecast must be registered to Google Home to display images from cameras.Displaying images voice command example:R OK Google, show .R OK Google, show on .Hiding images voice command example:R OK Google, stop .Note:R Images stop being displayed after about 1 minute if no operations are performed.Starting and stopping modes (all cameras except HD cameras)Modes can be started and stopped using Google Home.Starting modes command example:39Getting started with the HomeHawk!