![Panasonic HomeHawk KX-HNC500 User Manual Manual pdf 169 page image](https://manuals-archive2.s3.amazonaws.com/5443596/07a9c02b668b35f06f6bd0da6506c0a4169f.jpg)
however, if it is consistently low, confirm the network conditions (network traffic, camera and wirelessrouter placement or obstacles, etc.) for possible causes.1 View live images from the desired camera.2 Open the options menu (see “Displaying the options menu”, Page 151).3 Tap [Settings] ® [Video Settings] ® [Other Settings].4 Slide the [Bit Rate Level Icon] switch to the desired position.R When the switch is turned on, the bit rate is displayed while viewing HD camera images as follows.Highest bit rateHigh bit rateModerate bit rateLowest bit rateUsing WDR and HLSThese settings can produce a more pleasing image effect.1 View live images from the desired camera.2 Open the options menu (see “Displaying the options menu”, Page 151).3 Tap [Settings] ® [Video Settings] ® [Other Settings].4 Slide the [WDR] and [HLS] switches to the desired position.R WDR brightens the darker areas of the image and provides increased contrast and picture detail.R HLS reduces the brightness in areas of the image that are too bright.HD camera settingsGeneral settingsYou can customize general camera settings to suit your needs.1 View live images from the desired camera.2 Open the options menu (see “Displaying the options menu”, Page 151).3 Tap [Settings].4 Change the settings as desired.R Each setting is explained in this section.[Automatic Login]This setting determines whether or not you must enter a password each time you connect to the camera.Important:R Turning this feature on could allow unauthorized parties to access the camera if they are using yourmobile device.[Change Login Password]See “Login password”, Page 170.[Deregister the Mobile Device]See “Using one mobile device to deregister another mobile device”, Page 174.169Using an HD camera