Panasonic HomeHawk KX-HNC500 User Manual

Front door camera and outdoor camera setupFront door camera and outdoor camera setup (overview)There are 4 basic steps you need to perform in order to access the access point and your cameras fromyour mobile device.Connections¯Connect your access point to a power outlet and to your wirelessrouter.*1Download¯Download the [HomeHawk] app to your mobile device.Initial setup¯Use the [HomeHawk] app to register your mobile device to theaccess point.Register devices Add more mobile devices (smartphones and tablets) or cameras to thesystem.*1 Refer to the Installation Guide included with your access point for more information.Initial setupBefore you beginConfirm the following before you begin.– Make sure you have installed the [HomeHawk] app on your mobile device– Make sure your wireless router and the access point are turned on and the access point’s LEDindicator is lit in yellow (amber) or green– Make sure your access point is connected to your wireless router with an Ethernet cable– Make sure your mobile device is connected to the same wireless router as your access point– Make sure your mobile device can connect to the InternetNote:R If you have completed this procedure and want to register another mobile device to the access point,see “Registering other mobile devices to the access point”, Page 120.R If you experience trouble while performing this procedure, refer to the information in “Sometimes Icannot connect while at home”, Page 179.Initial setup1 Start the [HomeHawk] app by tapping its icon (shown below).R The end-user license agreement is displayed the first time you start the app.R Confirm all of the displayed permission screens and agree as necessary.R Select your country or region if displayed, and then tap [Next].119Using a front door camera and outdoor camera