Panasonic HomeHawk KX-HNC500 User Manual

When switched to this modeYou can choose the actions that will take place when the mode is switched to (either via a manualchange or via geo-fencing).– [Privacy Mode]: Turns the privacy mode on or off, or keeps the privacy mode in its current state.Once motion is detectedYou can choose the actions that will take place when the camera detects motion.– [Start Recording]: Enables recording when motion is detected.R [Duration]: Specifies the recording duration when motion is detected.– [Send Notifications]: Enables notifications for when motion is detected.– [Play Sound]: Specifies the sound (beeps or no sound) for when motion is detected.Editing modes1 Access the mode screen ( “Accessing the mode screen”, Page 63).2 Tap [Edit], and then tap next to the desired mode.3 Edit the desired settings.4 When finished, tap [Done].Deleting modes1 Access the mode screen ( “Accessing the mode screen”, Page 63).2 Tap [Edit], and then tap next to the desired mode.3 Tap .4 Tap [OK].Automatic Mode SwitchingYou can enable modes to be switched automatically depending on your location as determined bygeo-fencing.Geo-fencing is a location-based feature that can set up virtual boundaries around a geographical locationsuch as your home. When devices (mobile devices, etc.) enter or exit these boundaries, actions(changing modes, etc.) can be triggered.To use geo-fencing, you must allow the [HomeHawk] app to use the location of your mobile device.Note:R In order to use Automatic Mode Switching with the geo-fencing feature, your mobile device must beable to communicate with your camera. Therefore, the mode may not switch automatically in thefollowing situations.– your mobile device and/or your camera do not have good network conditions– your mobile device's battery does not have adequate charge remaining to use the Automatic ModeSwitching featureIn these cases, start the [HomeHawk] app on your mobile device.64Using a shelf, floor, and window camera