Panasonic HomeHawk KX-HNC500 User Manual

R Disabling night vision mode will reduce the visibility of images at night.Thumbnail imageYou can capture a still image from the camera and use it as its thumbnail, i.e., a small preview image.The thumbnail is displayed in the camera list.1 View live images from the desired camera.2 Open the options menu (see “Displaying the options menu”, Page 151).3 Tap [Set Thumbnail].4 Tap .R A still image is displayed.5 Tap [Save].Other image settingsDisplaying images upside downYou can display the camera image upside down.1 View live images from the desired camera.2 Open the options menu (see “Displaying the options menu”, Page 151).3 Tap [Settings] ® [Video Settings] ® [Other Settings].4 Tap [Upside Down].5 Tap .Adjusting the time stampYou can change the time format and position of the time stamp that is displayed when viewing cameraimages or recording. You can also turn the time stamp off.1 View live images from the desired camera.2 Open the options menu (see “Displaying the options menu”, Page 151).3 Tap [Settings] ® [Video Settings] ® [Other Settings].4 Tap [Time Stamp].5 Select the desired setting and then tap [OK].– [Position]: Determines the position of the time stamp. To turn the time stamp off, select [OFF].– [24-Hour Format]: Determines whether the time stamp is displayed in 24-hour format or 12-hourformat.Note:R To adjust the camera’s date and time setting, see “HD camera device profiles”, Page 171.Confirming the bit rateWhile viewing camera images, the camera can display an icon that corresponds to the current bit rate.Bit rate is a measure of how much data is being transmitted; if bit rate decreases when viewing cameraimages, image quality may also be reduced. Bit rate may vary depending on network conditions,168Using an HD camera