Panasonic HomeHawk KX-HNC500 User Manual

Floor camera mode settingsFloor camera mode settings (overview)Modes allow the cameras to operate according to pre-determined settings. You can use modes to matchwhere you are (at home, away from home, etc.) and what actions you want cameras to make (recordimages when motion is detected, etc.). You can use preset modes or create your own modes.ExamplesThe following are some examples of how you can use modes.– I want the camera light to turn on when I arrive home and turn off when I leave home– I want the camera to record images and make a sound when motion is detected by the camera– I want to receive notifications when motion is detected by the camera– I want the privacy mode to turn on when I arrive home so that camera images can’t be viewed(geo-fencing ( “Automatic Mode Switching”, Page 87) must be enabled)Preset modesThere are 3 preset modes that can be used for cameras: [Basic], [Home], and [Away].– [Basic]:Use this if you don't want to use a mode and don't want the camera to operate according topre-determined settings.– [Home]:This mode is typically used when you are at home. Use this in the following situations.R You want the camera to:→Turn on the light when you arrive home→Turn on the privacy mode when you arrive homeR You don’t want the camera to:→Record images or make sounds when motion is detected→Send notifications to you when motion is detected– [Away]:This mode is typically used when you are away from home. Use this in the following situations.R You want the camera to:→Record images or make sounds when motion is detected→Send notifications to you when motion is detected→Turn off the light when you leave home→Turn off the privacy mode when you leave homeThe following describes the settings for the [Home] and [Away] modes.Settings for when the mode changesYou can specify the settings for when the mode is activated, such as when you select this mode or whenit is automatically activated via automatic mode switching using geo-fencing ( “Automatic ModeSwitching”, Page 87).Setting [Away] [Home]Lighting Off OnBrightness – [High]Privacy Mode Off On85Using a shelf, floor, and window camera