Panasonic WJ-HL204/G Operating Instructions Manual

Contents

Panasonic WJ-HL204/G Operating Instructions Manual Manual pdf 21 page image

20password to access Setup. Pressing the button also closes the current menu or setup dialog box. In thePlayback mode, pressing the button displays the Search menu.Pressing and holding the button for three seconds or longer displays the PTZ camera menu. Selectingcameras from the menu by using the arrow buttons and the (Play/Pause) button, you can enter the PTZmode and can control configured cameras properly.Playback / Edit Group Button ([PLAYBACK] or [EDIT GROUP])Pressing the [PLAYBACK] button enters the playback mode, and pressing the button again exits theplayback mode. When entering the playback mode, video is paused. Pressing the (Play/Pause) buttonplays back video at regular speed. The screen displays “ ” when the recorder is in the Pause mode and thescreen displays “ ” when the recorder is playing back video.When in one of the multi-view formats, pressing this button enters the Triplex mode. The recorder supportsthe Triplex function: monitoring, recording and playing back at the same time.Pressing and holding the [EDIT GROUP] button for three seconds or longer enters the Edit Group mode.The yellow outline surrounding the video indicates the active channel, and pressing the arrow buttons movesthe active channel. Pressing the desired camera button in the active channel edits the Group and displaysthe video of selected camera. Pressing the (Play/Pause) button exits the Edit Group mode. Selecting“Exit Group Edit” in the Edit Group menu displayed when pressing the [MENU/PTZ] button also exits the EditGroup mode.Next Group / Sequence Button ([NEXT GROUP] or [SEQ])When in the live mode, pressing the [NEXT GROUP] button changes the screen from the current cameragroup to the next camera group, and the screen displays the page number. (The 4-channel model’smulti-screen is excluded.)Pressing and holding the [SEQ] button for three seconds or longer displays live channels sequentially.Multiscreen / Spot Button ([MULTISCREEN] or [SPOT])Pressing the [MULTISCREEN] button toggles between different display formats. The available formats are:PIP, 2x2, and 3x3(only 8-channel model).Pressing and holding the [SPOT] button for three seconds or longer allows you to select which cameras willdisplay on the Spot monitor.EL-Zoom / Return Button ([EL-ZOOM] or [RET])Pressing the [EL-ZOOM] button zooms digitally in the current image in double on the screen. You can usethe arrow buttons to move the rectangle to another area. Pressing the (Play/Pause) button zooms in theimage in rectangle.Pressing the [RET] button allows you to return to the previous menu when you are operating the camerasetup menu in the PTZ mode.Copy / Preset View Button ([COPY] or [PRESET VIEW])Pressing the [COPY] button allows you to copy video clips.The [PRESET VIEW] button is used to load a View Preset in the PTZ mode.Alarm / Preset Set Button ([ALARM] or [PRESET SET])The [ALARM] button has two functions. First, it will reset the recorder’s outputs including the internal buzzerduring an alarm. Second, it will display the event log when you are in the live protected. The [PRESET SET]button is used to save Presets in the PTZ mode.Panic Button [PANIC]Pressing the [PANIC] button starts panic recoding of all camera channels, and displays “ ” on the screen.Pressing the button again will stop panic recording.