Panasonic WJ-HL204/G Operating Instructions Manual

Contents

Panasonic WJ-HL204/G Operating Instructions Manual Manual pdf 61 page image

60Event Log SearchThe recorder maintains a log of each time the AlarmInput Terminal is activated. The “Event Log Search”screen displays this list. Use the arrow buttons tohighlight the event for which you would like to seevideo.The “Event Log Search” screen can also be accessedby pressing the [ALARM] button unless there is analarm. There is no determined user authority to displaythe “Event Log Search” screen, however, the eventvideo will not be played unless a user with Searchauthority logs into the system.Figure 99 : Event Log Search screenPressing the (Play/Pause) button will extract the event video and display the first image of the event.Pressing the button will start playing the “event” video segment. Pressing [PLAYBACK] returns to livemonitoring.Note: It is possible that no recorded image displays on the current screen. Press the[MULTISCREEN] button and change to multi-screen. You will be able to easily see thecamera have recorded video during target time.You can also narrow your event search by selecting the “Option…” button and setting up the new searchcondition.You can search video from the first to last recordedimages, or you can set the start and stop times anddates.Highlight the box beside “From” and press thebutton to toggle between On and Off. When set to Off,you can enter a specific Date and Time. When set toOn, the search will be from the first recorded image.Highlight the box beside “To” and press the button totoggle between On and Off. When set to Off, you canenter a specific Date and Time. When set to On, thesearch will be from the last recorded image.Figure 100 : Event Log Search Option screenHighlight the box beside “Check Time Overlap” and press the button. It toggles between On and Off. Youwill only be able to turn the “Check Time Overlap” on or off if a user-defined date and time is set to “From” and“To”. If the recorder’s date and time have been reset, it is possible for the recorder to have more than oneoverlapping start and stop time. When set to On, you will be asked to select one of the overlapping start andstop time. When set to Off, the recorder will display search results from all start times to all stop times.Highlight the box beside “Alarm-In” and press the button. You can select the alarm inputs that you want toinclude in your search.Highlight the box beside “Motion” and press the button. You can select the cameras for which you wantany reports of motion detection.Highlight the box beside “Video Loss” and press the button. You can select the cameras for which youwant any reports of lost video.Highlight the box beside “Video Blind” and press the button. You can select the cameras for which youwant any reports of blind video.Highlight the box beside “Record Channels” and press the button. You can select the cameras that youwant to search for any reports of event recorded data. The recorder will display the events (not the camerachannels) that occurred and that also are recorded on the camera channel that you selected. If you do not