Panasonic WJ-HL204/G Operating Instructions Manual

Contents

Panasonic WJ-HL204/G Operating Instructions Manual Manual pdf 38 page image

37Use the arrow buttons on the setup screen to move the VGA screenposition in the direction you want. Selecting the button at thecenter returns to the previous position.Figure 49 : VGA monitor position screenYou can save your Display settings by highlighting “Save” and pressing the button. Selecting “Cancel”exits the screen without saving the changes.Recording SetupYour recorder offers a variety of flexible recording modes. You can set it up to record all the time or to onlyrecord events. It can be set up to continue recording once the hard disk drive is full by recording over theoldest video, or you can set it up to alert you when the hard disk is full and stop recording.Figure 50 : Record menuRecordHighlight “Record” in the Record menu and press the button. The “Record” setup screen appears.Highlighting “Overwrite” and pressing the buttontoggles between On and Off. In the Overwrite mode,the recorder records over the oldest video data once allavailable storage space has been used. WhenOverwrite is turned off, the recorder stops recordingonce all available storage space has been used.Highlight the “Event Record Dwell” box and set thelength of time you would like to record for theassociated event. You can set the dwell from 5seconds to 30 minutes (Simple Mode only). Refer toEvent Actions screen in this chapter for informationregarding event recording.Figure 51 : Record - Settings screenHighlighting “De-Interlace” and pressing the button toggles between On and Off. When set to On, therecorder will turn the de-interlace filter on while recording video with Very High (D1) resolution.Note: The video signal has a time difference of 1/50 second between odd and even fieldsbecause it is composed of 50 interlaced fields per second. When recording video withVery High (D1) resolution, video is made up of frame units combining two fields – one oddfield and one even field. This can cause horizontal scan lines or flashes in areas with motionbecause of the time difference between the two fields. Turning on the de-interlace filterprovides clearer video by eliminating these horizontal scan lines and flashes.The recorder can record up to four audio inputs. Highlighting “Record Audio” and pressing the buttontoggles between On and Off.