Panasonic WJ-HL204/G Operating Instructions Manual

Contents

Panasonic WJ-HL204/G Operating Instructions Manual Manual pdf 27 page image

26Highlight the box beside “Automatic Sync.” and pressthe button. This toggles between On and Off.Highlight the box beside “Time Server” and press thebutton. A virtual keyboard appears that you can useto enter the IP address or domain name of the timeserver.Highlight the box beside “Interval” and press thebutton. Set the time interval for synchronization from30 minutes to 1 day at various time intervals.Figure 19 : Date/Time - Time Sync. screen.“Last Sync-Time” displays the last time the recorder was synchronized with the time server.Highlight “Run as Server” and press the button. Pressing the button toggles between On and Off.When it is On, the recorder you are setting up will run as a time server.Note: You can use the domain name instead of IP address if you already set up the DNS Serverwhen setting up the LAN.You can save your changes by highlighting “Save” and pressing the button. Selecting “Cancel” exits thescreen without saving the changes.StorageHighlight “Storage” in the System menu and press the button. The Storage setup screen appears anddisplays information about the recorder’s storage devices.The information in the “Type” column describes thestorage device.The capacity of the storage device is displayed in the“Capacity” column.The “Format” column displays whether the device isused for recording “Record” or not “Not Using”. “Notformatted” indicates the device is not formatted.Figure 20 : Storage - Information screenHighlight the box in the “Format” column for the desired storage device andpress the button. You will be able to format the device for recording.When selecting “Not Using” from “Use As” and highlighting the “Format”button, the device will not be used for recording.Figure 21 : Internal 1(Storage Format) screenHighlight the box in the “Information” column for the desired storage device and press the button. You willbe able to check the time information about recorded data.