Panasonic WJ-HL204/G Operating Instructions Manual

Contents

Panasonic WJ-HL204/G Operating Instructions Manual Manual pdf 33 page image

32Highlight the box beside “Port” and press the button. Use the arrow buttons to enter the SMTP Server portnumber obtained from your system administrator. The default port number is 25.Highlight the box beside “Authentication” and press the button. AnAuthentication screen appears. Highlight “Use” and press the button totoggle between On and Off. Highlight the box beside “User” / “Password” andpress the button. A virtual keyboard appears allowing you to enter theuser ID and password.Figure 35 : Authentication screenHighlight the box beside “Sender” and enter the sender’s e-mail address. Use the virtual keyboard to enterthe e-mail address.Note: The e-mail address must include the “@” character to be a valid address.Highlight the box beside “Recipient” and enter the recipient’s e-mail address. Use the virtual keyboard toenter the e-mail address.You can save your Mail changes by highlighting “Save” and pressing the button. Selecting “Cancel” exitsthe screen without saving the changes.Devices SetupYou can configure the video, audio, alarm and display.Figure 36 : Devices menuCameraHighlight “Camera” in the Devices menu and press the button. The “Camera” setup screen appears.You can turn the camera number On or Off, and youcan change the Title of each camera using the virtualkeyboard. You can also determine which cameras willdisplay on the monitors by selecting “Normal”, “Covert1” or “Covert 2” from a drop-down list in the “Use”column.Figure 37 : Camera - Settings screenNote: When selecting the “Covert 1”, the recorder displays the camera title and status icons onthe covert video. When selecting the “Covert 2”, the recorder displays only camera title onthe covert video.A user who does not have “Covert Camera View” authority cannot view video fromcameras set to “Covert 1” or “Covert 2” in both the live monitoring and playback modes.