Panasonic WJ-HL204/G Operating Instructions Manual

Contents

Panasonic WJ-HL204/G Operating Instructions Manual Manual pdf 37 page image

36You can define the screen layout in a variety of formats and set the recorder to sequence through thedifferent screen layouts (pages) so that all the cameras will be displayed. You can also set up the recorder todisplay one camera or a group of cameras all the time while cycling through the remaining cameras in a“channel” window. This can be done with one camera displayed full screen while displaying the channelwindow as a PIP (picture in picture), or displaying the cameras in a grid pattern with the bottom right windowas the channel.Sequence cannot be used in the 3x3 display mode of the 8-channel model.Note:A channel is defined as any cell within multi-screen display. The Edit Group mode allowsyou to change the screen layout by editing the group.You can adjust the display dwell time by highlighting the box beside “Interval” and pressing the button.You can select dwell intervals ranging from 1 second to 1 minute.Highlight “Event Monitoring On” and press the button. Pressing the button toggles between On and Off.When it is On, the recorder will display the camera associated with the event when an event occurs.Highlight the “Spot Monitor” tab to switch to the Spot Monitor screen.You can define which cameras display sequentially onthe Spot Monitor. Highlight the box in the “Channels”column and press the button. You can selectcameras and Dwell time ranging from 1 second to 20seconds.Figure 47 : Display - Spot Monitor screenHighlight the “VGA” tab to switch to the VGA screen.Highlight the box beside “Resolution” and press thebutton. You can select from 800x600, 1024x768 and1280x1024.Highlight “Full Screen” and press the button.Pressing the button toggles between On and Off.When it is On, the screen on the VGA monitor displaysin full screen mode.Highlighting “Preview” and pressing the buttonallows you to preview how the screen will be displayedon the VGA monitor.Figure 48 : Display - VGA screenHighlighting “Position” and pressing the button allows you to adjust the screen position on the VGAmonitor.