Panasonic WJ-HL204/G Operating Instructions Manual

Contents

Panasonic WJ-HL204/G Operating Instructions Manual Manual pdf 68 page image

67Clip PlayerNote: You will be asked to enter the password to initiate the Clip Player program if you selectSave Password option when saving recorded video.Note: Proper image display depends on the display settings of your PC. If you are experiencingdisplay problems, click the right mouse button on the background screen and select“Properties” >>“Settings” then set the “Color quality” to “32 bit”. Then select “Advanced”>> “Troubleshoot”, and then set the “Hardware Acceleration” to “Full”. Please make surethat DirectX version 9.0 or higher has been installed if the display problem continues. Tocheck the version of DirectX, click “Start” >>“RUN” and type “dxdiag” then hit the enterkey which will display “DirectX Diagnostic Tool” dialog box. Then move to the Display taband make sure “DirectDraw Acceleration” is set to “Enabled”. Test DirectDraw byselecting the DirectDraw Test button. Please check the driver version of the video card andupdate it to the latest version available. If you still have display problems after changing alldisplay settings as described above, try replacing the video card. Video cards with an ATIchipset are recommended.Clicking “X” exits the Player program.Click “ ” to go to the beginning of the video clip.Click “ ” to play the video clip in fast reverse.Click “ ” to go back one frame of the video clip.Click “ ” to play the video clip.Click “ ” to go forward one frame of the video clip.Click “ ” to play the video clip in fast forward.Click “ ” to go to the end of the video clip.Click “ ” to show the previous page.Click “ ” to cycle through the screen layouts. It cycles through 2x2, 3x3 and 1+7 (only 8-channel model).Click “ ” to show the next page.