Panasonic WJ-HL204/G Operating Instructions Manual

Contents

Panasonic WJ-HL204/G Operating Instructions Manual Manual pdf 32 page image

31Selecting “DHCP” from the Type and highlighting “Save”button reads the current IP address of the recorderconfigured by DHCP (Dynamic Host ConfigurationProtocol) network.Note: If the recorder is configured for DHCP, the IPaddress of the recorder might changewhenever the unit is turned on.Figure 32 : Network - LAN (DHCP) screenHighlight the “Web Browser” tab, and the Web Browser setup screen displays.Highlight “Use Web Browser” and press the button totoggle between On and Off. See “Appendix C — WebBrowser” for detailed descriptions of the Web Browser .Highlight the box beside “Port” and press the button.Set the port number used when accessing Web browserby using the Up and Down arrow buttons to increase ordecrease the numbers. The default port number is12088.Figure 33 : Network - Web Browser screenYou can save your Network changes by highlighting “Save” and pressing the button. Selecting “Cancel”exits the screen without saving the changes.MailThe recorder can be set up to send an e-mail when an event occurs.Highlight “Mail” in the Network menu and press the button. The Mail screen displays. You will be able tochange the Mail settings.Highlight “Enable” and press the button to togglebetween On and Off. You will only be able to changethe settings if Mail is enabled.Highlight the box beside “SMTP Server” and press thebutton. A virtual keyboard appears that you can useto enter the IP address or domain name of the SMTPserver.Figure 34 : Mail screenNote: You will need to get the IP Address or domain name of the SMTP Server from your networkadministrator.You can use the domain name instead of IP address if you already set up the DNS Serverwhen setting up the LAN.