Panasonic WJ-HL204/G Operating Instructions Manual

Contents

Panasonic WJ-HL204/G Operating Instructions Manual Manual pdf 48 page image

47Highlight “Use Ignoring Time” and press the button to toggle between On and Off. When set to On, therecorder will ignore video blind events occurred during the preset period. Highlighting “Time Setup…” andpress the button allows you to set up event ignoring time.Note: The record action for motion events will not be affected by the Video Blind ignoring function.Highlight the “Actions 1” and “Actions 2” tabs and the Video Blind Actions 1 and Actions 2 screens display.The recorder can be set to react to video blinddifferently for each camera. Each camera can beassociated with another camera, trigger an AlarmOutput Terminal, sound the recorder’s internal buzzer,notify a number of different devices, move PTZcameras to preset positions, and/or display a cameraon a Spot monitor.Highlight the box under the “Record” heading andpress the button. A list of cameras appears. Youcan associate as many cameras with that camera asyou wish. If the recorder detects video blind on theselected camera, it starts recording video from all theassociated cameras.Figure 75 : Video Blind - Actions 1 screenNote: For the Record action, the camera you select should be set to the Event or Time & Eventrecording mode in the Schedule screen.Highlight the box under the “Alarm-Out” heading and press the button. A list of Alarm Outputs appears.You can associate as many Alarm-Outs with that camera as you wish. When the recorder detects video blindon the selected camera, it will trigger output signals on all the associated Alarm Output Terminals. You canalso have the recorder’s internal buzzer sound if video is lost on the selected camera.Note: For the Alarm-Out action, the alarm output and beep you select should be set to the Eventmode in the Alarm-Out Schedule setup screen..Highlight the box under the “Notify” heading and press the button. You can toggle the entire list On andOff by highlighting “Notification” and pressing the button. You can toggle the individual items On and Offby highlighting that item and pressing the button. Highlight “OK” and press the button to accept yourchanges.Highlight the desired box under the “PTZ” heading, andpress the button. A list of PTZ presets appears.Select the preset position for each PTZ camera, whereyou want PTZ cameras to move to when the recorderdetects video blind on the selected camera’s input.Highlight the box under the “Spot Monitor” heading andpress the button. A list of Spot monitors andcameras appears. Each Spot monitor can beassociated with a camera. The recorder will display theassociated camera on the Spot monitor whenever itdetects video blind on the selected camera.Figure 76 : Video Blind - Actions 2 screenYou can save your Video Blind changes by highlighting “Save” and pressing the button. Selecting“Cancel” exits the screen without saving the changes.