Panasonic WJ-HL204/G Operating Instructions Manual

Contents

Panasonic WJ-HL204/G Operating Instructions Manual Manual pdf 34 page image

33Highlight the “PTZ” tab, and the PTZ setup screen displays.Note: You will only be able to set up PTZ devices ifthe PTZ port is set to RS485.Figure 38 : Camera - PTZ screenHighlight the box in the “Product” column for the PTZ camera you wish to configure andpress the button. A list of PTZ devices appears. Select your camera from the listand press the button. You will need to connect the camera to the RS485 connectoron the back of the recorder following the camera manufacturer’s instructions.Figure 39 : PTZ device listYou can assign IDs to each camera by highlighting the box under the “ID” heading and pressing the button.Change the number by highlighting it and using the Up and Down arrow buttons to increase and decreasethe number. The PTZ ID number can be set from 1 to 96.Highlight the “Setup…”and press the button. The Port Setup screen appears.Configure the port’s setting based on the PTZ camera manufacturer’sinstructions.Figure 40 : Port Setup screenYou can save your Camera changes by highlighting “Save” and pressing the button. Selecting “Cancel”exits the screen without saving the changes.AudioHighlight “Audio” in the Devices menu and press the button. The Audio setup screen appears.The recorder can record up to four audio inputs.Highlight the box in the “Associated Camera” columnand press the button. A list of cameras appears,and you can select which camera you want associatedwith that audio input.Highlight “Enable Audio-Out” and press the button.This toggles between enabling and disabling audio out.Figure 41 : Audio screenYou can save your Audio changes by highlighting “Save” and pressing the button. Selecting “Cancel”exits the screen without saving the changes.