66AppendixDisplay Setup Menu of CameraYou can operate the camera setup menu by calling up it from the recorder.While in the PTZ mode, select the “Device Menu” from the Advanced PTZ menu, and select “On” from the Onor Off menu. The camera setup menu displays on the PTZ camera screen.You can operate the camera setup menu by using the following buttons.To move the cursor Arrow Buttons ( Up / Down )To change the selected parameter Arrow Buttons ( Left / Right )To determine the selected parameterTo display the submenu Play/Pause Button ( button )To return to the previous menu [RET] buttonNote: To display the special menu of the camera setup menu, press and hold the button forthree seconds or longer after moving the cursor to “SPECIAL” on the camera setup menu.To reset the settings of the camera setup menu to the default settings, press and hold thebutton for 10 seconds or longer after moving the cursor to “CAMERA RESET” onspecial menu of the camera setup menu.System requirements for a PCIt is recommended to operate the recorder using a PC that meets the following requirements.OS: Microsoft® Windows Vista® Business SP1 (32-bit)Microsoft® Windows® XP Professional SP3Microsoft® Windows® XP Home Edition SP3OS language: English, French, Spanish, German, Italian, RussianCPU: Intel® Core™2 Duo 2.66 GHz or fasterMemory: 1 GB or more (512 MB or more when using Windows XP)Monitor: 1024 x 768 pixels or more, 24-bit True color or betterNetwork interface: 10/100 Mbps Network interface card must be installedWeb browser: Windows® Internet Explorer® 7.0*Microsoft® Internet Explorer® 6.0 SP3Audio: Sound card (When using the audio function)Other: DirectX® 9.0c or later* When using Windows VistaImportant: If using a PC that does not meet the above system requirements, it maycause problems such as slow imaging or the browser becomes inoperable .Audio will not be heard if a sound card is not installed on a PC.Microsoft Windows XP Professional x64 Edition is not supported.