Panasonic WJ-HL204/G Operating Instructions Manual

Contents

Panasonic WJ-HL204/G Operating Instructions Manual Manual pdf 24 page image

23InformationHighlight Information and press the button. The Information screen appears.In the “Information” screen, you can name the sitelocation, assign a System ID number, select thelanguage the screens are displayed in, displaysoftware version number, upgrade the software, showthe System Log, display recorded time data, and clearall data.Highlight the “Site” box and press the button. Avirtual keyboard appears that you can use to enter aSite Name.Once you have entered your site name, highlight “OK”and press the button.Figure 11 : Information screenHighlight the box beside System ID and press the button. Change the number by highlighting it and usingthe Up and Down arrow buttons to increase and decrease the number from 0 to 99.Note: The System ID number is used to identify the unit when it is connected with camerasthrough the RS485 port.Highlight the box beside “Language” and press button. A drop-down menu displays the availablelanguages. Highlight the desired language and press the button.The box beside “Version” displays the software version of the recorder.To upgrade the software, connect a USB flash drivecontaining the upgrade package file to the recorder.Highlight “Upgrade…” and press the button. The“Upgrade” screen appears.Figure 12 : Upgrade screenThe screen displays the upgrade package file names that are available. The “.rui” indicates that the file is forsoftware upgrades.Select the desired file and press the button. Highlighting the “Install” button and pressing the button willinstall the selected software package. Highlighting the “Cancel” button and pressing the button will closethe window without upgrading the software. If the upgrade package file is not installed on the recorderproperly, you will get an error message. The system restarts automatically after completing the upgrade.Important: The USB flash drive must be FAT16 or FAT32 format. The recommendedflash drive is USB 2.0 type.You can import saved recorder settings or export the currentrecorder settings. To import saved recorder settings,connect the USB flash drive containing the setup file (.dat) tothe recorder. Highlight “Import…” on the Information screenand press the button.Figure 13 : Setup Import screenSelect the desired setup file and press the “Import” button to import the selected settings and change therecorder settings accordingly. Highlight “Include Network Setup” and press the button to toggle betweenOn and Off. When set to Off, the network settings will not be changed.