74Time OverlapIf the recorder’s time and date have been reset to a time that is earlier than the existing recorded video, it ispossible for the recorder to have more than one video stream in the same time range. In this case, you cansearch overlapping video streams individually by selecting a specific segment. For example, when therecorder has recorded video from one to five o’clock and the user changes the time backward from five tothree o’clock and then continues recording until six o’clock, there will be two video streams and segmentsfrom three to five o’clock.You can search overlapping video streams by selecting a specific time or time range. If you want to searchrecorded video at four o’clock during the overlapping time range using a search menu such as “Go to theDate/Time”, select the segment you want to search.If you want to search recorded video from four to five o’clock during the overlapping time range using asearch menu such as “Event Log Search” or “Motion Search”, it is possible for the recorder to have twooverlapping start and stop times. You will be asked to select one of the overlapping start and stop times fromthe search time ranges as follows: From four o’clock of the first segment to five o’clock of the first segment From four o’clock of the first segment to five o’clock of the second segment From four o’clock of the second segment to five o’clock of the second segment