Panasonic WJ-HL204/G Operating Instructions Manual

Contents

Panasonic WJ-HL204/G Operating Instructions Manual Manual pdf 54 page image

53To use the front panel buttons, press the Left and Right arrow buttons to pan left andright. Press the Up and Down arrow buttons to tilt the camera up and down. Press the[ZOOM +] button to zoom in, and press the [ZOOM -] button to zoom out. You can usethe [FOCUS NEAR] button and the [FOCUS FAR] button to focus the image.You can establish preset positions for PTZ cameras. Press the [PRESET SET] button toestablish Presets.You can quickly move PTZ cameras to Preset positions. Press the [PRESET VIEW]button to view an established camera Preset position.Figure 85 : PTZ Select Camera menuYou can save camera position settings as “presets” so that you cango directly to desired views. Once you have the camera at thedesired settings, press the [PRESET SET] button, and the “SetPreset” dialog box will appear. Select the number you want toassign to the preset and press the (Play/Pause) button. Use thevirtual keyboard to enter the preset name. Press the [PRESETVIEW] button to load the PTZ preset and the “View Preset” dialogbox will appear. Select the desired preset and press the buttonto load the preset.The “View Preset” menu also can be displayed by clicking the rightmouse button on the screen while in the PTZ mode.< Set Preset > < View Preset >Figure 86 : PTZ Preset menuWhile in the PTZ mode, pressing the [PTZ] button or selecting “ ” (Advanced PTZ) in themenu displaying at the top of the screen displays the Advanced PTZ menu. Set thefeature you wish to control by selecting it from the menu. Refer to the cameramanufacturer’s instructions for the proper settings. Depending on the cameraspecifications, some features may not be supported.Figure 87 : Advanced PTZ menuYou can change the camera settings by using the “Device Menu” of the Advanced PTZ menu. Refer to theAppendix - “Display Setup Menu of Camera” for further information on operating the camera setup menu.You can use a mouse for convenient PTZ control. Position the mouse pointer at the bottom of the screen,and the following PTZ toolbar will display.Clicking “ ” on the left side exits the toolbar. If you want to display the toolbaragain, position the mouse pointer at the bottom of the screen. Change thetoolbar location by clicking the empty space on the left side of the toolbar anddrag it to where you want it located on the screen. Use the arrow buttons onthe toolbar to pan or tilt the camera in the direction you want. The othercontrols on the toolbar perform as described below:Figure 88 : PTZ panelZoom Out / In Focus Near / FarIris Close / Open Set / View PresetDevice Menu Set / ReturnNote: During controlling camera from the Web Browser, you cannot control any camera.