Panasonic WJ-HL204/G Operating Instructions Manual

Contents

Panasonic WJ-HL204/G Operating Instructions Manual Manual pdf 43 page image

42Terminals. Highlight the box beside “Panic Record” and press the button. A list of Alarm Inputs appears,and you can select which alarm input you want associated with panic recording. The recorder will continuepanic recording until an input on the selected alarm input is released as long as the [PANIC] button is notpressed to stop the panic recording.Highlight the “Actions 1” and “Actions 2” tabs, and the Actions 1 and Actions 2 setup screens appear.You can set the actions the recorder will take wheneverit senses an input on one of its Alarm Input Terminals.Highlight the desired box under the “Record” heading,and press the button. A list of cameras appears.Select the cameras that you want the recorder torecord whenever it detects an input on the associatedalarm input.Note: For the Record action, the camera you selectshould be set to the Event or Time & Eventrecording mode in the Record Schedulesetup screen.Figure 59 : Alarm-In - Actions 1 screenHighlight the desired box under the “Alarm-Out” heading, and press the button. A list of Alarm Outputsand Beep appear. Select the Alarm Output Terminals that you would like to activate whenever the recorderdetects an input on the associated alarm input. You can also set the recorder’s internal buzzer to sound.Note: For the Alarm-Out action, the alarm output and beep you select should be set to the Eventmode in the Alarm-Out Schedule setup screen.Highlight the desired box under the “Notify” heading, and press the button. The Alarm-In Notify screenappears.You can toggle the entire list On and Off by highlighting “Notification” andpressing the button. You can toggle the individual items On and Off byhighlighting that item and pressing the button. Highlight “OK” and pressthe button to accept your changes.Note: For the Notify action, the notify item you select should beenabled in the Notification setup screen.Figure 60 : Alarm-In Notify screenHighlight the desired box under the “PTZ” heading, andpress the button. A list of PTZ presets appear.Select the preset position for each PTZ camera, whereyou want PTZ cameras to move to whenever therecorder detects an input on the associated alarminput.Highlight the desired box under the “Spot Monitor”heading, and press the button. A list of Spotmonitors and cameras appears. Each Spot monitorcan be associated with a camera. The recorder willdisplay the associated camera on the Spot monitorwhenever it detects an input on the associated alarminput.Figure 61 : Alarm-In - Actions 2 screenYou can save your Alarm-In changes by highlighting “Save” and pressing the button. Selecting “Cancel”exits the screen without saving the changes.