Panasonic WJ-HL204/G Operating Instructions Manual

Contents

Panasonic WJ-HL204/G Operating Instructions Manual Manual pdf 30 page image

29You can save your changes by highlighting “Save” and pressing the button. Selecting “Cancel” exits thescreen without saving the changes.ShutdownHighlight “Shutdown” in the System menu and press the button. The “Shutdown” screen displays askingyou to confirm whether or not you want to shut the system down.After selecting “Shutdown” and pressing the button, a screen willappear telling you when it is safe to disconnect power.Note: If you turn off the recorder without this Shutdown operation,the last recorded video for maximum 60 seconds may be lost.Figure 27 : Shutdown screenNetwork SetupIn the Setup screen, use the Left or Right arrow buttons to display the Network menu.Figure 28 : Network menuNetworkHighlight “Network” in the Network menu and press the button. The Network setup screen displays. Youwill be able to change the Network, LAN and Web Browser settings.Highlight the first box beside “bps/ips”. Press the Upand Down arrow buttons to set the Transfer Speed from50 kbps to 100 Mbps or from 1.00 ips to 25.00 ips.Highlight the second box beside “bps/ips”. You canselect the unit of measure for the transfer speedbetween: “bps” and “ips”. Press the button to set thetransfer speed.Highlight the box beside “Quality” and press thebutton. You can select the Quality from: “Very High”,“High”, “Standard” and “Basic”. Press the button toset the Quality.Figure 29 : Network - Network screenHighlight the box beside “Resolution” and press the button. You can select the Resolution from: “VeryHigh” (D1), “High” (Half D1) and “Standard” (CIF). Press the button to set the Resolution.Note: The higher Quality and Resolution settings require higher Transfer Speed settings. Thetransfer speed you set is the maximum speed. Depending on the network environment,this speed may not be achieved.The recorder supports two-way audio communication between a local system and Web browser.Highlighting the box beside “Remote Audio Channel” and pressing the button allows you to select theaudio channel that sends audio to the web browser. Selecting “Select From Browser” will send audio of thechannel selected from Web browser.Note: Depending on network conditions, audio might be interrupted or out of synchronizationduring transmission.