9 – Specifications : Equalization104 TASCAM DM-3200 Owner’s ManualEqualizationAll filters are fitted with “gain flat” switchesSystem performancePhysical characteristicsEQ switch On/OffHIGH filter Gain: ±18 dB, 0.5 dB resolutionFrequency: 31 Hz to 19 kHzQ: 0.27 to 8.65Type: Hi-shelving, Peak, LPFHI MID filter Gain: ±18 dB, 0.5 dB resolutionFrequency: 31 Hz to 19 kHzQ: 0.27 to 8.65Type: Peak, NotchLO MID filter Gain: ±18 dB, 0.5 dB resolutionFrequency: 31 Hz to 19 kHzQ: 0.27 to 8.65Type: Peak, NotchLOW filter Gain: ±18 dB, 0.5 dB resolutionFrequency: 31 Hz to 19 kHzQ: 0.27 to 8.65Type Low-shelving, Peak, HPFTHD (maximum level,1 kHz, TRIM: minimum)20 Hz – 22 kHz LINE IN to INSERT SENDLINE IN to STEREO OUTPUT< 0.005%< 0.008%Frequency response(nominal level, 1 kHz,TRIM: minimum)0.5dB/-1.0dB MIC/LINE to INSERT SEND0.5dB/-1.5dB MIC/LINE to INSERT SEND0.5dB/-1.0dB MIC/LINE to STEREO OUTPUTa0.5dB/-1.5dB MIC/LINE to STEREO OUTPUTaa. MIC/LINE to channel module to STEREO OUTPUT, channel and stereo faders at 0 dB, pan hard left or hardright20 Hz – 20 kHz (44.1/48 kHz)20 Hz – 40 kHz (88.2/96 kHz)20 Hz – 20 kHz (44.1/48 kHz)20 Hz – 40 kHz (88.2/96 kHz)Noise level (20 Hz –22 kHz, TRIM: max,150 Ω)MIC in (PAD off) to INSERT SEND (A weight)STEREO OUT (Input no assign)ASSIGNABLE RETURN to ASSIGNABLE SEND2TR IN to CR OUTPUT (CR: max, 0dB)2TR IN to STUDIO OUT (STUDIO OUT 0dB)< –128 dBu (EIN)< –83 dBu< –85 dBu< –78 dBu< –88 dBuCrosstalk @ 1 kHz STEREO/BUSS/AUX OUTPUTSMONITOR OUTPUTS> 90 dB> 90 dBDisplays Backlit 320 x 240 LCD with contrast control2 x 12-segment LED metersFaders 17 x 100 mm stroke, motor-driven touch-sensitive fadersMaximum overall dimensions (w x d x h) including rest 700 x 824 x 230 (mm) 27.6 x 32.4 x 9.1 (in)Weight 24 kg (52.8 lbs)Voltage requirements 120 VAC, 60 Hz230 VAC, 50 Hz240 VAC, 50 HzPower consumption 65 WSupplied accessories Power cord,Quick Reference guide, 32 MB CF memory card, USB cable,CD-ROM, warranty card