5 – Channel modules : Surround operations78 TASCAM DM-3200 User’s ManualPan mode off When pan mode is off, the screenis much simpler. No pan controls are available, andthe only controls which may be set are the surroundmatrix selection and the individual speaker selectionon-screen buttons.LFE levelThe amount of signal sent by each channel to theLFE output can be set in the LFE LEVEL screen:Select the channel or use the cursor to move the boxcursor around the screen, and the POD encoders toadjust the LFE level.NOTEIf a channel is not assigned to the LFE, adjusting thelevel here will have no effect.At the bottom of the screen, you can use the POD 1encoder to select surround matrix 1 or 2.POD 3 encoder allows a batch LFE level to be set,and POD 4 sets the scope of the level setting (ALL,ODD, EVEN, or groups of eight channels) for the cur-rently selected surround matrix.Use ENTER to make the batch setting.Figure 5.34: Surround screen (pan mode off)Figure 5.35: LFE level
