8 – Remote operation : Machine control setupTASCAM DM-3200 User’s Manual 97Machine control setupWith the ALT indicator lit, press the REMOTE key.Use the first soft key to bring up this screen:This allows the setting of various machine controlparameters.Edit FramesWhen this is set on, location memories, etc. areedited to frame accuracy. When it is set to off, loca-tion settings are made to second accuracy.Cueing modeWhen this is on (checked), the FF and REW keys actas shuttle keys. Press the key in play mode to enterfast cueing shuttle mode, and release it to re-enterplay mode.In non-play mode, these keys function normally, evenwith this option selected.Play ModeThis function determines the way in which the PLAYkey works in conjunction with the location facilities.There are three settings: Auto, Deferred and Immediate.AUTO The PLAY indicator flashes as the unit islocating to a location point. When the location pointis reached, playback starts automatically. However, ifthe PLAY key is pressed before the location point isreached, the unit stops locating and starts playing.DEFERRED The unit stops after location is com-pleted. However, if the PLAY key is pressed while theunit is locating, the PLAY indicator flashes, and play-back starts when the location point is reached.NOTEBecause an open MMC connection cannot determinewhen the locate point has been reached, deferred playis not possible for a machine controlled in this way.IMMEDIATE The unit stops after location is com-pleted. If the PLAY key is pressed while the unit islocating, the machine goes straight into play mode,without locating.Play Command TypeUse this option to make the play commands from theDM-3200’s MIDI Machine Control compatible withthe unit being controlled.There are two options: True (02h) and Deferred (03h).Consult the documentation of your other equipmentfor details of compatibility.Figure 8.4: Machine control setup parameters