Tascam DM-3200 Owner's Manual

Also see for DM-3200: Quick reference Manual Software guide Application guide Release notes

Contents

9 – Specifications : Messages and troubleshooting108 TASCAM DM-3200 Owner’s Manual✔ Clear this fader grouping?Press ENTER to confirm,or a cursor key to cancel.Shown when the currently selected fader grouping is to be cleared.✔ Clock Check ResultsCurrent Fs: 48kHzSourcesWord : 44.1kHz0.0%Digi IN 1 : Out of RangeDigi IN 2 : Fs convert OnTDIF 1 : 44.1kHz0.0%TDIF 2 : 44.1kHz0.0%TDIF 3 : UnusableADAT : 44.1kHz+1.0%SLOT 1 : 48kHz+0.2%SLOT 2 : UnusablePress ENTER to continue.Results of performing a word sync check.✖ Clock Info: WORDNo signalPress ENTER to continue.A clock source has been selected, but no signal is present.✖ Clock Info: Digital In1C-bit : Illegal data.Press ENTER to continue.Shown when badly-formed digital audio is received at one of the DIGITAL INs.✔ Clock Info: INTERNALFs: 44.1kHzPress ENTER to confirm,or a cursor key to cancel.A valid clock source has been selected.✖ Clock Info: Digital In1Fs mode : Not indicatedCheck D-IN MANUAL SETUPPress ENTER to continue.An attempt is made to use a clock source, but the sampling frequency cannot bedetermined.✖ Clock Info: WORDNew clock source is out of range.Master clock is unchaged.Press ENTER to continue.A clock source has been changed, but the new clock is out of the permissiblerange.✔ COMP/EXP Library BANK a-bbbName : TASCAM DATACreate data: DEC/15/200420: 35: 45Project Name: PROJECT ORCAProject FS: 44.1kHzPress ENTER to continue.Information about a library entry (compressor/expander).✔ COMP/EXP Library Preset a-bbbName : TASCAM DATAPress ENTER to continue.Information about a library preset entry (compressor/expander).✖ COMP/EXP LibraryPreset 1-bbb is Read-only!An attempt has been made to store to a protected library entry (compressor/expander).● COMP/EXP LibraryBank a-bbb recalled.A library entry has been recalled (compressor/expander).● COMP/EXP LibraryPreset 1-bbb recalled.A library preset entry has been recalled (compressor/expander).● Completed. The selected operation (e.g. format or creation of project) has been completedsuccessfully✔ Confirm LIST Auto Detect?Press ENTER to confirm,or a cursor key to cancel.Confirming the auto-detection of machine control list✔ Confirm TRA Auto Detect?Press ENTER to confirm,or a cursor key to cancel.Confirming the auto-detection of transport control mapping.Action Message MeaningTable 9.2: Popup messages